Non contact laser thermometer for high temperature

Non contact laser thermometer for high temperature

Mars series one color pyrometer is a high performance, intelligent, high quality instrument, with a solid shape.It is made of 304 stainless steel movement (movement diameter is only 50mm), optional 304 stainless steel protection water jacket blowing cooling function, sealing parts are made of high temperature resistant rubber, protection grade IP65, suitable for industrial occasions.The monochromatic pyrometer adopts adjustable focus lens, high brightness green LED light source or visual eyepiece aiming, and clearly displays the position and size of the measured target.Achromatic lens, high reliability circuit design, over voltage, over current, short circuit protection (low temperature drift, design of full digital measurement, high integration SOC chip application, visualization eyepiece aim, OLED display) interface and software design (ambient temperature compensation and real-time signal processing, abnormal signal processing, a variety of applications software code optimization).These special designs enable the MARS series industrial infrared pyrometer to be used in a variety of demanding industrial applications and for precise temperature control.

Mars series monochromatic infrared pyrometer determine the temperature of an object by the radiation energy occurring over a narrow wavelength range.Thermometers measure the average temperature of an area, which is affected by emissivity, lens contamination, and background radiation.Advanced hardware and software design, wide dynamic range, high stability.

This Infrared Pyrometer is available in water jacket mounting and easy mounting models.Suitable for high ambient temperature with water jacket installation, harsh industrial environment, easy installation suitable for clean environment, environment temperature is not high industrial occasions.

The main considerations for selecting Infrared Thermometer are as follows: Temperature range: The temperature range of Sijie photoelectric products is -40~3300 degrees (segmented). Each type of thermometer has its specific temperature range. The temperature range of the selected instrument should match the temperature range of the specific application.Target size: When measuring temperature, the measured target should be larger than the field of view of the thermometer, otherwise there will be measurement error.It is recommended that the size of the object to be measured exceed 50% of the field of view of the thermometer.Optical resolution (D:S): that is, the ratio of the thermometer probe to the target diameter.If the thermometer is far away from the target and the target is small, choose a high resolution thermometer. 

Temperature Measurment Infrared Pyrometer can be widely used in heat treatment, casting, cement kiln, induction heating, monocrystalline silicon and polysilicon and other industrial temperature measurement.

Features

Measuring range：300℃～1400℃
Detector：InGaAs
Distance coefficients：100：1
Measuring Distance：Standard Focus length：0.35m adjustable to infinity，Near focus distance：0.2m～0.5m
Accuracy：±0.5%T℃（T is measured temperature）
Resolution：0.1℃
Repeat Accuracy：±2℃
Response time：Fasted 5ms, adjustable in 5ms-99.99s 

Technical Parameters