The temperature of the target is measured using the two-color ratio technique.The two-color ratio technology gets rid of the dependence on absolute energy measurement, and effective measurement can be carried out when the target is partially shielded and the measured target is smaller than the field of view measured by the infrared pyrometer. Another advantage of temperature measurement infrared pyrometer is that the measurement result is close to the high temperature in the field of view measured, rather than the average temperature. 2-color pyrometer can be installed further, even if the target is no longer filling the measurement market. This will not force you to install the thermometer at a specific distance due to the target size and range coefficient.
A infrared thermometer, with visual optical aiming system, large viewing field, adjustable focal length.The high-precision, highly repeatable thermometer receives the target's heat radiation and converts it into a measurable electrical signal.The infrared pyrometer provides a 4-20mA current output and can be easily installed in a variety of applications, especially in industrial environments where long distances and high interference are required.
The two color pyrometer determines the temperature of the object by measuring the ratio of energy of two different wavelengths. The advanced software and hardware design can satisfy the environment such as water vapor, dust, target size change, partial occlusion, emissivity change, even if the detection signal attenuation is 95%, it will not have any influence on the temperature measurement result.The 2-color infrared pyrometer has the function of on-site emissivity adjustment, which is convenient for users to make on-site correction for different measured targets and improve the effectiveness and authenticity of the measurement results.
STRONG series high-temperature two color infrared pyrometer can be used for temperature measurement of wire rod, hot rolled plate, forging, casting, cement kiln, heat treatment, induction heating, monocrystalline silicon, polysilicon and other industrial applications.It can also be used in vacuum furnace, graphite furnace, high temperature furnace and other ultra-high temperature under 3000℃ dual-color temperature measurement applications, and has high stability.
Measuring range：3500℃～2200℃
Detector：InGaAs
Distance coefficients：100：1
Measuring Distance：Standard Focus length：0.35m adjustable to infinity，Near focus distance：0.2m～0.5m
Accuracy：±0.5%T℃（T is measured temperature）
Resolution：0.1℃
Repeat Accuracy：±2℃
Response time：Fasted 5ms, adjustable in 5ms-99.99s
Model | STRONG-G-3522 |
Measuring Range | 350℃～2200℃ |
Detector | InGaAs |
Wavelength | （1.45～2.1）μm |
Applications | High accuracy and High cost performance monochrome pyrometer applied to temperature measurement in the various industries.such as: inductioin heating,heat treatment, Galvanized wire ,also suitable for temperature measurement in a good environment. |
Distance coefficients | 100：1 |
Focal length | Standard：0.35m adjustable to infinity， Near focus distance：0.2m～0.5m |
Accuracy | ±0.5%T℃（T is measured temperature） |
Resolution | 0.1℃ |
Repeat Accuracy | ±2℃ |
Calibration coefficient | 0.100～1.000, Adjustable in 0.001 increments |
Response time | Fasted: 5ms，adjustable in 5ms-99.99s |
Display mode | Industrial-grade self-luminous OLED display screen (default) or visual eyepiece aiming |
Aiming method | Visual green spot (default) or eyepiece aiming, alternative |
IP Rating | IP65 |
