Stainless steel movement (movement diameter is only 59mm), standard stainless steel protective sleeve (with blowing and cooling function), high temperature resistant rubber sealing parts, protection grade IP65, suitable for various industrial occasions. Software and hardware design, suitable for one million times of signal processing, can meet the user of the instrument precision, repeatability, and other aspects of the requirements.
Infrared thermometer (STRONG-G-2516) is widely used in metallurgical industry (wire rod, hot rolled plate, forging) and casting industry, cement kiln, induction heating, monocrystalline silicon and polysilicon and other industrial temperature measurement.
STRONG series monochromatic pyrometer is touchless pyrometer, which does not need to touch the inside or surface of the temperature field to be measured. Therefore, it will not disturb the state of the temperature field, and the one-color infrared pyrometer itself is not damaged by the temperature field.The measurement range is wide, because of the non-contact temperature measurement, the thermometer can stay in the normal temperature or the conditions that the thermometer allows. Under normal circumstances can be measured from negative tens of degrees to more than three thousand degrees.The temperature measurement speed is fast, and the response time is fast. As long as the infrared radiation of the target is received, the temperature can be fixed in a short time. High accuracy, the industrial infrared pyrometer will not destroy the temperature distribution of the object itself as the contact temperature measurement, so the measurement skill is high.Also has high sensitivity, as long as the object temperature has a small change, the radiation energy has a big change, easy to measure. The spot pyrometer can measure the temperature of tiny temperature field and temperature distribution, as well as the temperature of moving objects or rotating objects. It is safe to use and has long service life.
Attention should be paid to the problems when using the infrared thermometer: the infrared thermometer only measures the surface temperature, the 1-color infrared pyrometer can not measure the internal temperature.The wavelength above 5um can not be measured through quartz glass, glass has very special reflection and transmission characteristics, does not allow accurate infrared temperature reading.But the temperature can be measured through the infrared window. temperature measurment infrared pyrometer should not be used for temperature measurement on bright or polished metal surfaces (stainless steel, aluminum, etc.).
To locate the hot spot, the instrument aims at the target and scans it up and down until it determines the hot spot.Pay attention to environmental conditions: steam, dust, smoke, etc.It blocks the optical system of the instrument and affects accurate temperature measurement.Ambient temperature, allowing the instrument to adjust to the new ambient temperature within 20 minutes if the high-temperature 1-color pyrometer is suddenly exposed to a high ambient temperature.
Measuring range：2500℃～1600℃
Detector：InGaAs
Distance coefficients：100：1
Measuring Distance：Standard Focus length：0.35m adjustable to infinity，Near focus distance：0.2m～0.5m
Accuracy：±0.5%T℃（T is measured temperature）
Resolution：0.1℃
Repeat Accuracy：±2℃
Response time：Fasted 5ms, adjustable in 5ms-99.99s
Model | STRONG-G-2516 |
Measuring Range | 250℃～1600℃ |
Detector | InGaAs |
Wavelength | （1.45～2.1）μm |
Applications | High accuracy and High cost performance monochrome pyrometer applied to temperature measurement in the various industries.such as: inductioin heating,heat treatment, Galvanized wire ,also suitable for temperature measurement in a good environment. |
Distance coefficients | 100：1 |
Focal length | Standard：0.35m adjustable to infinity， Near focus distance：0.2m～0.5m |
Accuracy | ±0.5%T℃（T is measured temperature） |
Resolution | 0.1℃ |
Repeat Accuracy | ±2℃ |
Calibration coefficient | 0.100～1.000, Adjustable in 0.001 increments |
Response time | Fasted: 5ms，adjustable in 5ms-99.99s |
Display mode | Industrial-grade self-luminous OLED display screen (default) or visual eyepiece aiming |
Aiming method | Visual green spot (default) or eyepiece aiming, alternative |
IP Rating | IP65 |
