Designed for chemical splash and static-accumulation hazards, the selection uses chemical-resistant and anti-static materials together with filtered respiratory devices to help personnel operate in accordance with regulations.

---

Typical areas: refining units, tank farms, loading bays
Configuration: flame-retardant chemical suit, half-mask with A2-P3 cartridges, oil-resistant anti-static boots
Standards: GB 24540-2020, EN 14605

Based on arc-energy levels, insulation and fall-protection items are combined to reduce electrical-shock and height-related risks during maintenance.

---

Typical areas: substations, transmission towers, wind farms
Configuration: arc-rated safety helmet, 12 cal/cm² arc-flash suit, insulating gloves, energy-absorbing safety harness
Standards: GB/T 17622-2021, ASTM F1506

Considering dust and mechanical hazards, dust-filter masks and puncture-resistant footwear are specified to allow movement in confined spaces.

---

Typical areas: development headings, long-wall faces, belt roadways
Configuration: mining ABS helmet (with lamp clip), KN95 respirator, cut-resistant gloves, puncture-resistant S3 boots
Standards: GB 2626-2019, GB 21148-2020
 

To meet food-contact and low-temperature requirements, easy-to-clean and non-shedding materials are adopted to limit cross-contamination.

---

Typical areas: raw-material bays, cutting lines, cold-store entrances
Configuration: vented safety helmet, food-grade disposable mask, anti-bacterial clean-room coverall, powder-free nitrile gloves, white slip-resistant safety shoes
Standards: FDA 21 CFR 177, GB 14881

Static and particulate contamination are controlled by using conductive yarns and low-linting designs to maintain cleanliness grades.

---

Typical areas: wafer fabs, packaging/testing rooms, data centres
Configuration: anti-static cap, low-breathing-resistance cleanroom mask, conductive-fiber coverall, PU fingertip-coated gloves, anti-static over-boots
Standards: GB/T 22845-2009, IEC 61340-5-1
 

In mixed-traffic areas of people and vehicles, retro-reflective and bump-protection items are combined with an alarm system to remind personnel to keep safe distances.

---

Typical areas: high-bay racks, loading docks, cold-chain warehouses
Configuration: reflective vest, cut-resistant gloves, steel-toe oil-resistant shoes, UWB collision-warning system
Standards: GB/T 30030-2013, EN 388

+86-18896742589

ibd@sjgdkj.com

Liangu Intelligent Manufacturing Center, Economic Zone, Changzhou, Jiangsu